Technical Specification

Vehicle Dimensions & Weights

Model
Designated Passenger Seats4
Berths (sleeping positions)4
Dimensions & weights
Overall length5.99m
Overall width (mirrors folded)2.33m
Overall height (incl TV aerial)2.95m
MTPLM (a)*3500kg
3650kg
Mass in running order (b)2913kg
Maximum user payload (a-b)587kg
737kg
Maximum trailer weight**2000kg
Gross train weight5000kg
Bed sizes
Front Double-
Rear Fixed Double1450mm x 1350mm x 2200mm
Front Single880mm x 1950mm
Fixed Rear Singles-

Engine & Gearbox Data

Engine
Engine typeFIAT Ducato2.3 Multijet II SCR E6D-Temp
Gearbox6-speed manual gearbox
Mixture preparation/injection methodElectronically controlled Common Rail Multijet2 direct injection with variable geometry turbocharger and intercooler
Number of cylinders4
Cubic Capacity2287 cc
Max power: kW (hp) at rpm103 (140) at 3500
Max torque: nm at rpm350 Nm/1400 rpm.
Fuel tank capacity90L
EU exhaust emission standardEuro 6D-Temp
Emission controlSCR Catalyst and Adblue injection with particulate filter (DPF)

External dimensions of garage door

Internal dimensions of garage

Measures in millimeters

(*) In this model the rear garage door has a special shape. the dimension in the datasheets is referred to the "minimum" dimension available

Width730(*)
Height1200
Depth2200

The masses indicated in this catalogue refer to the provisions of European Directive 2007/46/EC.

PAYLOAD

This consists of the difference between the maximum technically permissible laden mass and the mass in running order. It includes elements for living purposes, the transported passengers defined by the manufacturer (driver excluded), and the personal effects. The payload calculation is based on the following parameters: 75 kg for each passenger (driver excluded), 10 kg of baggage for each passenger and for the driver, 10 kg for each metre of length of the vehicle, plus the remaining payload, which can be used for the installation of accessories or for additional baggage. All masses and loads of the empty vehicle have a tolerance of +/- 5%, in compliance with Directive 2007/46/EC. Any optional equipment increases the mass in running order and decreases the payload.The weight of non-standard accessories is not included in the mass in running order indicated in this catalogue.

Additional accessories and devices reduce the payload by a quantity equal to their weight; the incidence of the weight of the individual accessories is shown in the special column in the technical data sheets or can be requested at our dealers. In case certain accessories are installed (for example, additional elements such as coupling device or motorbike rack), the mass of these accessories will affect the payload, possibly reducing it along with the number of certified seats. Please make sure that the maximum loads on the axles and the maximum technically permissible load mass are not exceeded during the complete loading phase of the vehicle. The regulations and requirements of each country may entail changes in the characteristics of this table. The number of certified seats may vary depending on the traffic regulations in force in each country.

MASS IN RUNNING ORDER

It includes the weight of the empty BASE vehicle, of the driver (75 kg), 100% of the fuel (60-l tank), fresh water (tank filled with 20 l while travelling), and a gas tank for living purposes (20 kg). The mass in running order, and consequently the payload and/or certified seats may vary depending on the accessories installed.

NOTES

SEA S.P.A. – McLouis reserves itself the right to change the characteristics and the furnishings of all its models with no advance notice required; all data contained in this leaflet must therefore be considered approximate and non-binding. Despite thorough checks of the contents, we cannot exclude possible printing and/or translating errors. This catalogue does not constitute contractual documentation. Any reproduction, including in part, of the test or of the content of this document is prohibited. The indicated weights are exclusively approximated . Tolerances of +/-5 % are allowed. Generally speaking, special equipment and options increase the no-load weight and entail a reduction in the payload. We hereby decline any and all responsibility in case structural changes are made to the vehicle; any assembly, disassembly or changes carried out by unauthorised workshops may jeopardise your safety and cause the warranty clauses to be forfeited. For additional information on installation and technical details, please contact one of our dealers.

GARAGE WEIGHT CAPACITY UP TO 300 KG

The load for the rear stowage has a maximum limit of 300 kg, uniformly distributed, in respect of the distribution of the maximum permissible loads on the front / rear axles.

Day Floorplan

Night Floorplan

Fusion 331 Technical

Fusion 360

Fusion 360 day floorplan Explore the 360

Fusion 367

Fusion 367 day floorplan Explore the 367

Fusion 373

Fusion 373 day floorplan Explore the 373

Fusion 379

Fusion 379 day floorplan Explore the 379
Back to top